冷原子干涉陀螺研究进展

近年来,基于激光冷却与俘获的冷原子干涉技术得到了飞速的发展,这为精密转动测量提供了新的研究方向。相比于传统陀螺,冷原子干涉陀螺具有更高的灵敏度,是新一代的惯性测量仪器。从冷原子干涉陀螺的测量原理出发,介绍了近几年国内外干涉型冷原子陀螺的实现技术路线和研究现状,对比了各技术路线的优缺点,提炼出了最佳的研制冷原子干涉陀螺的总体技术方案,为高精度和高动态测量的陀螺样机研制提供了技术基础。     

空间三轴激光陀螺现状与展望

空间三轴激光陀螺作为激光陀螺技术集成创新的典型代表,已充分展现出优越的综合性能。为全面了解和掌握空间三轴激光陀螺技术发展现状,本文梳理了空间三轴激光陀螺原理与组成、主要特点、关键技术和研究历程,分析了国外主要研究机构、典型产品型谱及应用现状,从中可见空间三轴激光陀螺在国外已经非常成熟和广泛应用。针对国内发展现状和存在的差距,提出了后续发展建议,为我国激光陀螺技术发展及产业化提供了参考。     

高过载微惯性器件研究现状

微惯性器件是目前制导战术武器的核心元器件,具有成本低、体积小、寿命长等优点,但是其如何在火炮膛内、侵彻着靶等过程中存活甚至正常工作,一直是各军事大国科研院所发展精确打击制导武器的重要研究方向。查阅了相关国内外文献,然后详细评述了目前关于应用于高过载环境下的微机械陀螺与微机械加速度计研究现状,指出了目前高过载环境微惯性器件的发展趋势与各国的研究进程,为我国发展高过载微惯性器件提供了方向与指导。     

In-orbit assessment of laser retro-reflector efficiency onboard high orbiting satellites

The navigation and geodetic satellites that orbit the Earth at altitudes of approximately 20,000 km are tracked routinely by many of the Satellite Laser Ranging (SLR) stations of the International Laser Ranging Service (ILRS). In order to meet increasing demands on SLR stations for daytime and nighttime observations, any new mission needs to ensure a strong return signal so that the target is easily acquirable. The ILRS has therefore set a minimum effective cross-section of 100 million square metres for the on-board laser retro-reflector arrays (LRAs) and further recommends the use of ‘uncoated’ cubes in the arrays. Given the large number of GNSS satellites that are currently supported by SLR, it is informative to make an assessment of the relative efficiencies of the various LRAs employed. This paper uses the laser ranging observations themselves to deduce and then compare the efficiencies of the LRAs on the COMPASS-M1 navigation satellite, two satellites from the GPS and three from the GLONASS constellations, the two GIOVE test satellites from the upcoming Galileo constellation, the two Etalon geodetic spheres and the geosynchronous communications test satellite, ETS-8. All the LRAs on this set of satellites employ back-coated retro-reflector cubes, except those on the COMPASS-M1 and ETS-8 vehicles which are uncoated. A measure of return signal strength, and thus of LRA-efficiency, is calculated using the laser-range full-rate data archive from 2007 to 2010, scaled to remove the effects of variations in satellite range, atmospheric attenuation and retro-reflector target total surface area. Observations from five SLR stations are used in this study; they are Herstmonceux (UK), Yarragadee (Australia), Monument Peak and McDonald (USA) and Wettzell (Germany). Careful consideration is given to the treatment of the observations from each station in order to take account of local working practices and system upgrades. The results show that the uncoated retro-reflector cubes offer significant improvements in efficiency.     

大量程MEMS陀螺仪在高速旋转导弹上的应用

弹旋频率是影响旋转导弹制导精度的主要因素之一.本文提出了一种弹旋频率测量用大量程MEMS陀螺仪技术方案,开展了大量程MEMS陀螺仪在旋转导弹上的应用研究,解决了大量程MEMS陀螺仪在偏心安装、较大力学环境下提高测量精度等问题,通过了飞行试验验证,实现了旋转导弹弹旋频率的精确测量.     

选区熔化过程多尺度多物理场建模研究进展

选区熔化技术是一种基于粉末床的、能够精确成形复杂零件、调控微观组织和性能的金属增材制造技术,其成形过程的计算机模拟对于生产实践具有重要指导意义。综述了国内外的研究现状,首先介绍选区熔化技术的原理及其特点;然后介绍国内外对选区熔化过程已经开展的计算机模拟技术的研究进展;并进一步重点介绍针对电子束选区熔化过程的多尺度多物理场模型,主要包括:(1)微观尺度电子束与材料相互作用的能量吸收模型;(2)细观尺度从铺粉到粉末加热、熔化、流动、沉积成形全过程的模型;(3)宏观尺度零件成形过程模型。     

Determination of station positions and velocities from laser ranging observations to Ajisai,Starlette and Stella satellites

The positions and velocities of the four Satellite Laser Ranging (SLR) stations: Yarragadee (7090), Greenbelt (7105), Graz (7839) and Herstmonceux (7840) from 5-year (2001–2005) SLR data of low orbiting satellites (LEO): Ajisai, Starlette and Stella were determined. The orbits of these satellites were computed from the data provided by 20 SLR stations. All orbital computations were performed by means of NASA Goddard’s GEODYN-II program. The geocentric coordinates were transformed to the topocentric North–South, East–West and Vertical components in reference to ITRF2005. The influence of the number of normal points per orbital arc and the empirical acceleration coefficients on the quality of station coordinates was studied. To get standard deviation of the coordinates determination lower than 1 cm, the number of the normal points per site had to be greater than 50. The computed positions and velocities were compared to those derived from LAGEOS-1/LAGEOS-2 data. Three parameters were used for this comparison: station coordinates stability, differences from ITRF2005 positions and velocities. The stability of coordinates of LEO satellites is significantly worse (17.8 mm) than those of LAGEOS (7.6 mm), the better results are for Ajisai (15.4 mm) than for Starlette/Stella (20.4 mm). The difference in positions between the computed values and ITRF2005 were little bit worse for Starlette/Stella (6.6 mm) than for LAGEOS (4.6 mm), the results for Ajisai were five times worse (29.7 mm) probably due to center of mass correction of this satellite. The station velocities with some exceptions were on the same level (≈1 mm/year) for all satellites. The results presented in this work show that results from Starlette/Stella are better than those from Ajisai for station coordinates determination. We can applied the data from LEO satellites, especially Starlette and Stella for determination of the SLR station coordinates but with two times lower accuracy than when using LAGEOS data.     

线性调频半导体激光衍射光栅干涉仪

介绍一种以线性调频半导体激光为光源的衍射光栅干涉仪。激光与光栅上衍射的±１级衍射波会合，由于有光程差而发生光拍频，测量拍频信号的相位移则可测得光栅的位移。设计了一种克服激光波长漂移和空气折射率变化影响的对称差动光路，使这种方法达到实用化的程度，分辨力达到纳米级。此外，还介绍了应用于接触干涉仪的实验情况。     

星敏感器低频误差与陀螺漂移离线校正方法

获取高精度事后姿态数据是提高遥感平台成像质量的必要条件之一,离线处理可有效降低敏感器测量误差,从而获得更高的姿态确定精度。基于滤波的校正方法中,星敏感器低频误差(LFE)与陀螺漂移将产生耦合影响导致校正精度低,本文针对该问题推导了耦合误差的数学模型,并设计了一种两步双向平滑事后处理算法,将陀螺漂移与低频误差分两步校正,通过反复滤波剥离陀螺漂移与低频误差。同时,针对低频误差参数收敛速度慢、噪声参数调节困难的问题,利用一种基于极大似然估计(MLE)的固定窗口自适应双向滤波算法进行处理以获得更好的噪声估计,提高了收敛速度和收敛精度。文中仿真工况下,离线姿态确定精度可达到0.8″(3σ),低频误差参数完全收敛时间不超过4个轨道周期。     

脉冲激光测距误差标定及不确定度分析CSCD

以脉冲激光测距机的测距误差标定为背景,通过对测距误差解析表达式的推导,给出了系统各不确定度分量对测距误差的影响,计算了信号延迟时间、探测器和激光二极管响应时间、晶振频率、大气折射率等不确定度分量。通过对某已标定激光测距机实验验证表明:该装置在500m^20 000m测距范围内,测量重复性引入的相对标准不确定度最大值为0.67m,满足该类激光测距机测量不确定度5m(k=2)的校准测试需求。因此,利用该解析表达式可以实现对脉冲激光测距误差的有效评估,这对于脉冲激光测距测试系统、脉冲激光测距机的设计具有重要的指导意义。